Buyer's Guide: High-End Systems - November 2000

High-end Professional 3D
A high-end professional 3D system requires a number of high-end components. CPU performance is critical and we need more RAM here than any other system we've looked at previously. The graphics requirements are also very different in the professional space and a large monitor is critical.

Processor – AMD Athlon "Thunderbird" 1 GHz- $300
At similar clock speeds, the Athlon holds a significant advantage in price and performance in professional 3D applications. That, of course, makes the decision for our High-End Professional system's CPU a no-brainer. We’ve chosen a Socket-A Athlon 1 GHz, which means that it's using the new Thunderbird core with on-die cache.

Besides the direct performance benefits of full speed on-die cache, we also get the side benefit of enhanced overclockability. If you're willing to overclock our CPU, you can save some money by going with the 700 MHz model, most of which will hit 900 - 950 MHz at default voltage, all without exotic cooling. The 1 GHz chip may overclock a bit further thanks to its use of copper interconnects.

For more information on all Athlon processors, read our Athlon "Thunderbird" 1.2GHz & Duron 800 MHz Review and our Thunderbird / Duron Overclocking Revealed Aritcle.

Motherboard – ABIT KT7-RAID - $160
The availability of AMD 760 motherboards is still non-existant for the "do it yourself" market, so we'll have to wait at least another month before DDR SDRAM systems make an appearance here. The VIA KT133, however is here now and is the best chipset for the Athlon right now. We recently looked at as many KT133 Socket-A boards as we could get a hold of and one board stood out head and shoulders above the rest - the ABIT KT7-RAID. As we noted in the roundup, the KT7 is the perfect board to overclock with thanks to its completely jumperless Soft Menu III CPU setup.

Click to Enlarge

The Asus A7V is also an excellent choice that also offers complete overclocking/multiplier control, albeit not in 100% jumperless form. The MSI K7T Pro2 has finally hit the streets soon as well, with new and improved overclocking options, including multiplier manipulation. We expect that the K7T Pro2 will probably become the motherboard of choice in the value systems since it will probably cost about $20-30 less than the ABIT KT7 or Asus A7V. The EPoX EP-8KTA2, Soyo K7VTA, and FIC AZ11E are also decent choices for overclockers.

For more information, read our ABIT KT7-RAID Review, Asus A7V Review, MSI K7T Pro2 Review, and Socket-A KT133 Motherboard Roundup.

Memory – 512MB Corsair or Mushkin CAS 2 PC133 SDRAM (2x256MB DIMM’s) – $280 x 2
Even though memory is relatively cheap these days, it is a key factor in the performance of most professional apps.  For a high-end system like this, 512MB is not unreasonable and easily fits within the budget.

As for the exact brand of memory, we recommend Corsair or Mushkin modules.  We use them in our test systems and have had absolutely no problems with them. 

Video Card – ELSA GLoria II (NVIDIA Quadro) - $600
NVIDIA’s Quadro is simply the most powerful workstation 3D accelerator we’ve tested to date.  Based on the same T&L GPU of the GeForce, the Quadro runs at a higher core clock speed, 135 MHz, and enables certain features that were left disabled on the GeForce. Among these features is enhanced support for anti-aliased points and lines, which, although it isn’t a commonly used feature with most users, was an extremely poor performance point for the GeForce.

With their previous experience in the professional market, ELSA was able to score exclusive rights to manufacture the Quadro.  The Gloria II is ELSA’s implementation and comes with 64MB SDR SDRAM.  While a DDR version of the Quadro has been announced, and even tested by AnandTech, it’s not actually available anywhere at the moment.  At $650, the SDR version of the Gloria II is a relative steal compared to some of the other professional 3D accelerators out there.  Throw in the fact that it’s fully support under Windows NT 4.0, Windows 2000, and Linux and it becomes quite clear that the Quadro is the best choice.

NVIDIA has already announced a professional version of the GeForce 2 GTS, the Quadro2 Pro and the Quadro2 MXR. The Quadro2 Pro is GeForce2 GTS based, while the MXR is the GeForce2 MX based part - ELSA once again has the "exclusive" distribution rights on cards using these chipsets. Unfortunately, neither card has surfaced just yet, so with that in mind, it seems wise to hold off a bit if you can. Granted, we've been saying that for 2 months now, but hopefully the Quadro2 Pro really will be available soon. For more information, see our ELSA Gloria II Review.

Monitor – iiYama VisionMaster PRO 510 - $900
Using a Mitsubishi Diamondtron NF, the iiYama VisionMaster Pro 510 provides a perfectly flat display surface using the same technology in Sony’s FD Trinitron models, but at a lower cost.  Make sure you can deal with the damper wires that all Trinitron style tubes have.  The VisionMaster PRO 510 is a 22” monitor and has been highly acclaimed here on AnandTech and by owners alike. 

For more information, read our iiYama VisionMaster PRO 450 and VisionMaster PRO 510 Reviews.